• MANUFACTURER, MANAGER AND SCIENTIST OF THE GEOLOGICAL SECTOR (To the 80th anniversary of the birth and 65th anniversary of professional activity of Ivan Martynenko)

  Anatolii Vdovychenko, Oleksandr Sokolov

  3-13

  • pdf (Українська)
• ANALYSIS OF MODERN METHODS OF BUILDING INFORMATION PORTALS OF A SCIENTIFIC AND ACADEMIC INSTITUTION

  Volodymyr Kulakivskyy, Іван Скворцов, Oleksandr Davydov

  13-19

  • pdf (Українська)
• AUTOMATION OF PERSONNEL MANAGEMENT PROCESSES OF THE INSTITUTE OF SUPERHARD MATERIALS (ISM).

  Vira Tsehelniuk, Іван Скворцов, Volodymyr Kulakivskyy

  19-26

  • pdf (Українська)

Rock destructive tool from superhard materials and technology of its application

• DEVELOPMENT AND IMPLEMENTATION OF SOLID MILLED PDC BITS

  D. Korystysheskii, M. Bondarenko, V. Mechnik, I. Dzhanzakov, S. Buktybaeva

  27-33

  • pdf (Українська)
• DESIGN FEATURES OF THREADED CONNECTIONS OF CASING COLUMNS

  Miroslava Chernova, YAROSLAV KUNTSIAK

  33-39

  • pdf (Українська)
• STUDY OF TECHNOLOGICAL FEATURES OF THE IMPLEMENTATION OF THE HYDROMECHANICAL DRILLING METHOD

  Andrii Ihnatov

  39-49

  • pdf (Українська)
• OVERVIEW OF BINDING SUBSTANCES FOR MANUFACTURING BLOCK GRAVEL FILTERS OF HYDROGEOLOGICAL WELLS

  Andrii Sudakov, Hennadii Hapich, Andrii Shumov, Ludmila Holub

  49-58

  • pdf (Українська)
• ANALYSIS OF SOME PROPERTIES OF DRILLING MUD AND THEIR INFLUENCE ON WELL DRILLING PROCESS INDICATORS

  Yevhenii Koroviaka, Andrii Ihnatov, Oleksandr Davydenko, Mykyta Mekshun

  58-68

  • pdf (Українська)
• BASIC TECHNICAL, TECHNOLOGICAL AND ECOLOGICAL ASPECTS OF THE CONSTRUCTION PRODUCTION WELLS

  Artem Pavlychenko, Andrii Ihnatov, Yevhenii Koroviaka, Askerov Islam

  69-79

  • pdf (Українська)
• FEATURES OF TECHNICAL AND TECHNOLOGICAL SUPPORT FOR WELL CASING AND CEMENTING OPERATIONS

  Artem Pavlychenko, Andrii Ihnatov, Yevhen Stavychnyi

  80-92

  • pdf (Українська)

Instrumental, structural and functional materials based on diamond and cubic bor

• HPHT-DIAMOND FLAT FACE FORM PERFECTION DEPENDING ON CARBON SATURATION LEVEL IN GROWTH CELL

  Андрій Бурченя, Tetyana Kovalenko, Olena Suprun, Sergii Gordeev, Valrntin Lysakovskyi, Vyacheslav Klochok, Andrii Nikolenko, Viktor Strelchuk

  93-103

  • pdf (Українська)
• FORMATION OF DIAMOND SINGLE CRYSTALS WHEN CHANGING THE CONFIGURATION OF THE RESISTIVE HEATING SYSTEM IN HIGH-PRESSURE CUBIC-TYPE DEVICES

  Валентин Лисаковський, Sergii Ivakhnenko, Andrii Burchenia, Tetyana Kovalenko, Viktor Strelchuk, Andrii Nikolenko, Sergii Ivanchenko, Anton Marchenko

  103-110

  • pdf (Українська)
• USE OF X-RAY TOPOGRAPHY FOR STUDYING THE REAL STRUCTURE OF НРНT-MONOCRYSTALS OF DIAMOND TYPE IIa

  Олена Супрун, Tetiana Kovalenko, Tetiana Kovalenko, Oleg Zanevskyy, Andriy Burchenia, Viacheslav Klochok, Anton Marchenko, Oleksii Timchenko

  111-116

  • pdf (Українська)
• CALIBRATION OF THE REACTION CELL OF THE HIGH-PRESSURE APPARATUS BY TEMPERATURE AND PRESSURE

  V. Turkevych, O., М. Bezhenar, O.

  116-127

  • pdf (Українська)
• CUBIC HIGH-PRESSURE APPARATUS AND ITS CAPABILITIES FOR PRESSURE GENERATION

  Mykola Bezhenar, Andrii Patsyk, Yaroslav Romanenko, Oleksandr Sokolov, Oleksandr Leshchuk

  127-132

  • pdf (Українська)
• NUMERICAL STUDY OF THE INFLUENCE OF THE BEVEL SIZE OF THE ANVIL OF A HIGH-PRESSURE CUBIC APPARATUS ON THE ANVIL STRENGTH AND THE LEVEL OF PRESSURE GENERATED

  Sergiy Polotnyak, Oleksandr Lyeshchuk, Valentyn Lysakovskyi, Sergii Ivakhnenko

  132-140

  • pdf (Українська)
• HIGH PRESSURE HIGH TEMPERATURE CONSOLIDATION OF DIAMOND POWDER WITH TITANIUM COATING

  Олександр Бочечка, Oleksandr, Tetiana Kyryliak, Andrii Fylypovych, Vladyslav Venikov, Anna Liamtseva

  141-146

  • pdf (Українська)
• APPLICATION OF MORPHOMETRIC CHARACTERISTICS FOR ASSESSING THE INFLUENCE OF HIGH PRESSURE ON DIAMOND POWDER OF DIFFERENT GRAIN COMPOSITION AT THE STAGE OF HPA LOADING AND DURING SINTERING

  Oleksandr, Hryhorii Petasiuk, Oleksandr, Valentyna, Владислав Вєніков, Anna Liamtseva, Оlha Kushch

  147-156

  • pdf (Українська)
• COMPARATIVE STUDY OF THE TECHNOLOGICAL PROPERTIES AND UNIFORMITY OF DIAMOND POWDER OBTAINED BY FLOTATION SEPARATION OF THEIR INITIAL SAMPLE

  Grigorii Petasyuk, Halyna Ilnytska, Nonna, Olha, Halyna, Olha Petasiuk

  156-166

  • pdf (Українська)
• CALCULATION OF THE HEATING CURRENT POWER OF A SIX-PUNCH HIGH-PRESSURE APPARATUS USING ANSYS APDL

  Т. Panasiuk

  166-169

  • pdf (Українська)
• RESEARCH ON THE INFLUENCE OF METHODS OF OBTAINING ABRASIVE DIAMOND POWDER ON ITS PHYSICAL AND MECHANICAL CHARACTERISTICS

  Nonna, Halyna, Grygorii Petasiuk , Olha Sizonenko, Galyna Bazaliy, Serhii

  170-179

  • pdf (Українська)
• PHYSICAL AND CHEMICAL ASSEMBLY OF COMBINED MULTI-COMPONENT HEAT-RESISTANT AND WEAR-RESISTANT COATINGS ON THE SURFACE OF ABRASIVE GRINDING POWDER

  Volodymyr, Oleksandr, Valerii, Ольга Лещенко, Vasyl, yaroslav Silchenko, Oleh Pasichnyi, Serhii Lysovenko, Serhii Staryk, Viktor Bilorusets, Viktor Skriabin, Valerii Skriabin, Oleksandr Koshkin

  180-194

  • pdf (Українська)
• INCREASING THE EFFICIENCY OF SEPARATION ACCORDING TO THE DEFECTIVENESS OF THE SURFACE OF DIAMOND GRINDING POWDERS IN AN AQUEOUS MEDIUM

  Halyna ilnytska, Valerii Lavrinenko, Olga Loginova, Oleksandr Sokolov, Serhii Staryk, Iryna Zaitseva, Anatolii Zakora, Viktoriia Tymoshenko, Liudmyla Kotynska, Tamara Kosenchuk

  195-203

  • pdf (Українська)
• SYNTHETIC DIAMOND POWDERS WITH GRAIN SURFACE MODIFIED BY HEAT-RESISTANT OXIDES AND CHLORIDES: PRODUCTION, PROPERTIES, APPLICATION

  Dr. Poltoratskiy V., Hrihorii Petasiuk , Oleksandr, Valerii, Oleh, Vasyl

  204-225

  • pdf (Українська)
• CONSECUTIVE SOLID-PHASE hBN(1)-cBN-hBN(2) TRANSFORMATIONS AT 7 GPa UNDER EXTREMELY HIGH TEMPERATURE GRADIENTS

  Piotr Klimczyk, Igot Petrusha, Yuliia Rumiantseva, Kinga Momot, Petro Sadovyi, Stanislav Gierlotka

  225-235

  • pdf
• РОЗРАХУНКИ ТЕМПЕРАТУРНИХ ПОЛІВ У ОСЕРЕДКУ РОБОЧОЇ КОМІРКИ АПАРАТІВ ВИСОКОГО ТИСКУ ТИПУ «ТОРОЇД» ТА «КЗ» ПРИ ОДЕРЖАННІ ОДНОШАРОВИХ НАДТВЕРДИХ КОМПОЗИТІВ СИСТЕМИ cBN–Al–TiС (TiN)

  Ya Romanenko, М.

  235-244

  • pdf (Українська)
• RESEARCH OF THE THERMAL STATE OF THE HIGH-PRESSURE APPARATUS CELL WITH COMBINED HEATERS AT GROWING THE GALLIUM NITRIDE CRYSTALS

  Олексій Людвіченко, Олександр Лєщук, Сергій Гордєєв, Ігор Петруша

  245-252

  • pdf (Українська)

Development and implementation of equipment and tools equipped with hard alloys

• STUDY OF THERMAL CONDUCTIVITY OF WC-Co SOLID ALLOYS TREATED WITH 8 GPa PRESSURE AT HIGH TEMPERATURE

  Iryna Hnatenko, Anton Bieliaiev, Ihor Andreiev, Oleksandr Osipov

  253-260

  • pdf (Українська)
• FEATURES OF THE FORMATION OF THE STRUCTURE AND PROPERTIES OF THE MEDIUM-GRAIN HARD ALLOY ВН20 (80% WC + 20% Ni) SINTERED IN VACUUM AT A TEMPERATURE OF 1350 1350О С AND UNDER THE EFFECT OF EXTERNAL UNIAXIAL COMPRESSION

  Oleksandr, Mykola, Nataliia Lytoshenko

  260-265

  • pdf (Українська)
• ESTIMATION OF STRENGTH AND PLASTICITY OF WC–Co HARD METALS MADE ON THE BASE OF ULTRA-COARSE-GRAINED WC WITH A COBALT COATING

  Nataliia

  266-272

  • pdf (Українська)
• INFLUENCE OF TECHNOLOGICAL FACTORS ON THE STRUCTURE AND PROPERTIES OF MICROGRANULES FROM HARD ALLOYS OF VK TYPE

  Volodymyr

  273-282

  • pdf (Українська)
• SOLID PASTES WITH SYNTHETIC DIAMOND MICRON POWDERS WITH HEAT-RESISTANT COATING

  Volodymyr Poltoratskiy, Oleksandr Bochechka, Valerii Lavrynenko, Ольга Лещенко, Vasyl Bilochenko, Yurii Syrota

  283-286

  • pdf (Українська)
• ESTIMATION OF THE SPECIFIC ENERGY CAPACITY OF GRINDING OF TOOL STEEL WITH THE INPUT OF ADDITIONAL ENERGY INTO THE PROCESSING ZONE

  Валерій Лавріненко, Volodymyr Solod, Ye Ostroverkh, Larysa Prots

  286-295

  • pdf (Українська)
• PROGNOSTICATION OF THE THERMAL STATE OF THE SUPERHARD MATERIALS TOOL DURING FRICTION STIR WELDING OF HEAT-RESISTANT ALLOY

  Vasyl Dutka, Anatoliі Maіstrenko, Serhii Zabolotnyi, Andrii Stepanets

  295-305

  • pdf (Українська)
• TOOL MADE OF CUBIC BORON NITRIDE POWDER WITH CVD COATING

  А. Manohin, Yu. Melniichuk, S. Klymenko, М. Semenko, G. Petasyuk, А. Fylypovych, А. Klymenko, Yu. Ryzhov

  305-314

  • pdf (Українська)
• RESEARCH OF THE PROCESS OF HOLE FORMATION WITH FORSTNER DRILLS

  Leonid Devin, Serhii Rychev, Volodymyr Nechyporenko, Oleksandr Gryazev, Andrii Skrypnyk

  315-321

  • pdf (Українська)
• EFFECT OF THE PROCESSING TYPE ON SLM 3D PRINTED IPLANTANT SURFACE ROUGHNESS BASED ON Ti-6Al-4V POWDER

  Efimenko Maksym, Tsysar Maksym, Klochkov Ilaya, Motrunich Svyatoslav, Katok Oleg, Babak Anton, Golovenko Iaroslav

  321-331

  • pdf (Українська)
• PRINCIPLES OF ADDITIVE ELECTRON BEAM TECHNOLOGY FOR MANUFACTURING SPARE PARTS FROM VT20 TITANIUM ALLOY POWDER

  Maksym Tsysar, Klochkov Ilaya, Motrunich Svyatoslav, Katok Oleg, Matviichuk Vladyslav, Babak Anton

  331-346

  • pdf (Українська)
• PREPARING BY PRESSURELESS SINTERING OF LARGE-SIZE PARTS FROM FUNCTIONAL AlN CERAMIC MATRIX COMPOSITE FOR DESIGN OF WIDE-RANGE HIGH-VOLTAGE AMPLIFIER

  Artem Dovhal, Dmytro Chasnyk, Igor Fesenko, Yulian Tuz, Oksana Kaidash, Volodymyr Sverdun, Tetiana Serbeniuk , Vasyl Chasnyk, V. omelianenko

  347-354

  • pdf (Українська)
• POLISHING OF OPTICAL SURFACES OF DETAILS FROM POLYSTYRENE

  Юрій Філатов, Volodymyr Sidorko, Andrei Boyarintsev, Sergei Kovalev, Vitalii Kulich, Viktor Kovalev, Oksana Yurchyshyn

  355-361

  • pdf (Українська)
• INFLUENCE OF BORON NITRIDE IMPURITY ON PHYSICAL AND MECHANICAL PROPERTIES AND WEAR RESISTANCE OF SIALON

  Vyacheslav Ivzhenko, Tamara Kosenchuk, Ihor Fesenko

  362-369

  • pdf (Українська)
• GRINDING OF WELDED MATERIALS FROM SPECIAL ALLOYS WITH DIAMOND ABRASIVE HEADS

  Serhii Riabchenko, Yaroslav Arhyrov, Tetiana Mechkarova

  369-375

  • pdf (Українська)
• THE INFLUENCE OF THE ALCOHOL-RESISTANT NITRIDE GLASSES COMPOSITION ON THEIR STRUCTURE AND PROPERTIES

  Eugene Pashchenko, Denys Savchenko, Svitlana Kukharenko, Vyacheslav Bychykhin, Roman Kurganov

  375-381

  • pdf (Українська)
• МЕCHANISM OF FORMATION OF THE WORKING SURFACE MIKRORELIEF HONING IN THE PROCESS OF HONING

  O. Denisenko, V. Kisel, V. Bilorusets, L. Makarenko, O. Koshkin

  381-384

  • pdf (Українська)